Combine GPS tracking with cameras, Bluetooth devices, industry-specific reports, special alerts, working time recorder, and other tools available in a single fleet platform to remotely see the real situation at the construction site.
Major construction industry companies use Mapon solutions
We rented out a EUR 80.000 Avant skid steer loader to our client, and it was stolen from a construction site in Finland. Thanks to Mapon, we found and retrieved it – in Estonia!
Tampereen Lainaväline Oy
Construction equipment rental
We operate vehicles in hard-to-access areas that significantly affect the fuel consumption and depreciation costs. Mapon’s driver behaviour analysis helps identify such sites and we can use this data to prepare more precise financial proposals for our clients.
Schwenk
Building materials producer
Asset tracking for construction
On construction sites, equipment moves constantly and frequently gets lost. You have to make duplicate purchases and even one construction tool can cost up to €3,000 – that’s not something you’ll want to lose again.
Asset Tracking solves the root problem: you can’t manage what you can’t see. Every asset appears on the same map as your fleet, so you always know where it was last detected and where it has been.
Our construction clients say getting started with the Mapon platform and apps is quick and easy. Start saving time as soon as you digitise.
• From spending afternoon calculating work hours to checking reports instantly in Worktime • From losing time with calls about fuel expenditure to taking a look at fuel graphs • From hopping between software of different machinery providers to integrating OEM data in one platform • Instead of spending time and fuel to go to the site personally – manage remotely with cameras
Tools built to improve cost efficiency
We know what creates fleet costs for construction companies, so Mapon platform has solutions to help you reduce them. Our clients often analyse excessive vehicle idling, recurring harsh driving events, unnecessary heavy equipment motor hours, compare employee work hours with camera footage, and more. We provide data that you can turn into savings.
Many security solutions in one place
A Bluetooth (BLE) device costing a couple of euros will help save your tools that often cost over 1000 euros. Use hand-picked solutions that will pay off after the first incident. Tool theft? Use small BLE trackers. Missing vehicles? Locate with GPS devices. Not enough eyes on the ground? Install cameras. Fuel drainage? Set up fuel tank alarms. And get access to 40+ alerts, so you can react ASAP.
Issues you face and how Mapon helps
With 20+ years in the industry and a large number of construction industry clients, we learned specific issues you face. Here’s how to deal with them.
You risk cost overruns and client complaints on job speed
If you are not directly on-site or there are multiple projects ongoing, then there’s a chance work is not going at the expected speed or that clients may dispute it. Build systems that will keep you informed and in control.
Oversee the work site via camera livestream, without physically visiting.
Tracking devices and integrations provide you with motor hour data of heavy equipment and accessories.
Most data you track can be assembled in an automatic report, exported, and provided to interested parties.
You do things manually, it costs more and may create downtime
Small inefficiencies in your daily work have a tendency to pile up. A quicker-working company has a better chance of winning tenders and creating positive word-of-mouth.
Use integrations to receive data from factory-installed (OEM) devices of major machinery manufacturers in one platform: BOMAG, Wirtgen Group, Liebherr, DYNAPAC, Caterpillar, and Volvo AEMP!
Leverage the Driver app for employees: communicate in one system, require foremen to submit progress reports with the built-in Forms tool.
Track fuel consumption of vehicles remotely to resupply the work site on time and give data to accounting.
Set automatic reminders for document, license, asset service deadlines.
You get unnecessary costs during routes from and to the site
Foremen, cement mixers, flatbed trucks – they all need to get to the construction site. Use proven methods to save money on these trips.
Driving behaviour analysis
Track harsh braking, acceleration, speeding, and other fuel-wasting habits, then coach drivers.
Compare refuelling data with what’s actually in the tank to discover fuel theft. View fuel graphs to see which vehicles or drivers perform less efficiently than others in comparable circumstances.
A Mapon representative will reach out to you within 24 hours on business days!
Let’s improve your profit margins with construction fleet management software
Fill out the form, and we’ll get you up and running! We’ll reply to your inquiry within 24 hours on business days; advise you on best options regarding subscription plans, solutions, and devices; help with onboarding and adapting the platform to your needs
Reliable Construction Fleet Management Results
Mapon is an established player in the fleet management and asset tracking industry:
400 000+
devices installed
35k+
active clients
20+
years in business
150+
partners worldwide
The platform adapted to your needs
Working with the Mapon platform is easy. Reach all the necessary sections with a couple of clicks. Quick statistics are available on the dashboard instantly. Free your mind by setting alerts and reminders to email, in-platform, or even SMS. Generate reports with only the necessary data and schedule them to update regularly.
We have Mapon Expert for construction machinery and heavy duty vehicles, which provides accurate data, from fuel consumption to driving behaviour.
Mapon Basic tracker is perfect if you just want to know where your pickup truck is.
Asset tags are small and useful for tools, static assets, and secondary protection of large equipment.
Our fleet camera systems are suitable for everything from wheel loaders to excavators. Fuel rods, meanwhile, offer the most precise fuel tracking of all methods.
We can do the installation, but most of our products have self-install variants as well. Install on your own, save time and resources!
In the construction industry, a fleet refers to all vehicles used by a specific company, including cement mixers, bulldozers, dump trucks, and more.
How do you manage a construction fleet?
A construction fleet is best managed with a fleet management software, such as Mapon. That way, you don’t have to be on-site to manually perform a variety of operational duties, including calculating employee work times, checking up on vehicle locations, collecting fuel bills, and more.
Instead, you can manage all your fleet data in a single platform.
How is GPS used in construction?
Construction companies often use GPS for fleet management. They install tracking devices in vehicles and other valuable assets to remotely see their real-time locations on interactive maps.
The main benefit of construction GPS tracking is safety – if the equipment is not where it’s supposed to be on the map, a fleet manager can react quickly. Managers can also set up alerts that instantly warn them about vehicles leaving an area without authorisation. In addition to safety, GPS tracking in construction helps with task allocation, calculating mileage and ETAs, among other benefits.
What is asset tracking in construction?
Asset tracking in the construction industry involves installing trackers on different things and then monitoring their locations with specialised software, such as the Mapon platform.
Companies do this to protect valuable construction equipment, containers, generators and the like - their locations are visible on a live map. If assets are not at the designated location, then the manager can raise an alarm immediately.
.png)
Search
+371 6727 1803
